July 2014

A/C Trends: Rooftop Systems Impacting the Marketplace

by Kelsey Nolan, Assistant Editor

After two years of research, engineering analysis and testing, ACT launched the RTS-75 in February.

After two years of research, engineering analysis and testing, ACT launched the RTS-75 in February.
Since the initial development of rooftop air conditioning (A/C) systems, companies industrywide have been tweaking existing technology for a more sophisticated, efficient and greener design. The result has been heavier-duty compressors, systems designed for small buses, renegotiated seals to eliminate leaks and even the successful application of units departing from their intended usage. And, as the customer demand for rooftop systems continues to grow and the environmental standards remain stringent, manufacturers are focusing their attention to the greener refrigerant, HFC 1234YF, to assess how it can complement their already existing products.

METRO spoke to industry experts to find out how these new technologies can benefit your transit agency’s vehicles in new and consistent ways.

American Cooling Technology
Though American Cooling Technology is still partnered with Espar in the distribution of large rooftop A/C units, the company needed a solution suitable for smaller shuttle-bus type vehicles. Rooftop A/C systems and condensers are a great option for most buses because of the location.

Placing these units atop the bus, rather than underneath, removes the risk of picking up debris and dust, reducing maintenance intervals. Plus, the physical distance from the road surface allows the circulation of cooler and cleaner air, especially in desert cities. ACT wanted to offer this application for smaller vehicles as well.

Since ACT specialized in rooftop condensers and, over the years, has created a family of condensers, producing its own rooftop A/C unit for smaller vehicles was the logical next step. The result is the RTS-75 air conditioner system. After two years of research, engineering analysis and testing, ACT launched the system in February. The A/C units are available in two capacity ranges, 75,000 BTU/hr. and 90,000 BTU/hr., and include optioning heating coils and digital driver’s display with A/C systems diagnostics. The units can also be supplied with a 12-volt or 24-volt electrical system.

According to ACT’s GM, Dave Oberdorff, while customer feedback has been positive, orders have come in for an application the company didn’t anticipate: the installation of two A/C systems on a larger bus.

He explains that often front-engine buses can be purchased with two TM21 compressors, but instead of having front and rear split system evaporator units hanging from the ceiling, customers are putting two units up on the roof. This application allows for more cooling capacity, proper draining of the evaporators and makes for a more redundant cooling system. In case one unit goes offline, there is a backup unit that operates completely independently.

“That was kind of a nice surprise to us — how many of these were sold and applied on buses using two instead of just one,” Oberdorff explains.

Rifled Air Conditioning Systems

Rifled Air’s BH-20 evaporator is designed to fit both the front and rear bulkhead of buses.

Rifled Air’s BH-20 evaporator is designed to fit both the front and rear bulkhead of buses.
When a customer came to Rifled Air Conditioning Systems (RAC) with a drainage problem on their two-hole drain pan in the bulkhead evaporators a little over a year ago, execs at the company found a way to implement a quick and permanent solution: the BH-20 bulkhead style evaporator with a four-hole drain pan rather than the previous two-hole pan.

The BH-20 Bulkhead Style evaporator is a 60,000 BTU evaporator designed to fit the front and rear bulkhead of buses. What is nice about these evaporators is they give the appearance they are almost entirely integrated into the body of the vehicle rather than an add-on hang down passengers can hit their heads on. Plus, there are access panels on the units, enabling technicians to easily reach all the fittings and service points on the units as well the blower motors and fans.

Cheyne Rauber, GM and sales manager for RAC, explains that after live test driving the unit to pinpoint the problem, a four-hole drain pan was suggested. Since RAC does all of its metalwork in-house, Rauber and his team were able to prototype the new bulkhead within a week, and the system was in full production within three weeks. Rauber says the best part is that they eliminated the customer problem, while creating a brand new feature on RAC’s bulkhead evaporator.

The benefit of the four-hole pan is that no matter the orientation of the vehicle, there is always a positive flow. This way, there is never water building up and spilling over the pan, and thus, spilling onto passengers.

Additionally, the bulkhead unit has rivnuts mounted on the side of the units, which allows for a wide variety of mounting applications. With this variety, RAC can customize brackets and covers to fit any application in the market.

Additionally the company has seen success with its new weather pack condensers, which offer a weather tight connection at all connection points. With the new condensers, the need for exposed terminals that can be subject to corrosion, especially in snowy climates, is eliminated.

Thermo King

Thermo King’s Athenia AMII can be mounted on CNG buses, parallel and series hybrid-electric buses, and battery and trolley buses.

Thermo King’s Athenia AMII can be mounted on CNG buses, parallel and series hybrid-electric buses, and battery and trolley buses.
With a growing need for a lighter, more efficient HVAC system that is easy to service, Thermo King developed the Athenia AMII platform for buses. With brazed aluminum, micro-channel condensers, this cooling and heating combo platform is a replacement for both existing roof-mounts and rear-mounts at a lower weight and features improvements in coil design, air flow and high ambient temperatures. Though these units have been available for conventional buses since late 2013, applications for electric platforms have only recently been launched. Combined, these systems are can be mounted on compressed natural gas (CNG) buses, parallel and series hybrid-electric buses, and battery and trolley buses.

Additionally, the AMII is available with the alternator-driven all-electric HVAC as the all-electric HVAC solution for diesel and CNG buses.
Steve Johnson, product manager for transit and coach HVAC at Thermo King, says these new lightweight and higher performing condensers will now be offered as the standard as the company continues to explore further improvements.

Trans/Air Manufacturing

Trans/Air Manufacturing has also not been idle with customer demand. Amongst various new products, such as the TM43 Compressor/Mount & Drive Kit, which is a heavier duty compressor for large scale buses, the company has rolled out two new rooftop systems: the RT65 and RT96 Rooftop Systems.

Rick Lehnert, president of Trans/Air Manufacturing, says that as the company gets more aggressive in the transit bus and motorcoach markets, it needed a rooftop A/C system that addresses the smaller market, since it already has technology for larger buses. The trend toward low-floor buses and more coach sales has increased the demand for roof-top systems. Rooftop systems also allow gentler, cleaner and quieter operation while manufacturing flow can be better with rooftops. Rooftops also can result in less installation labor.  

Lehnert says the product is designed to not have a protrusion down in the center aisle, so it doesn’t impact head clearance. The two systems offer either free-blow distribution or ducted air distribution, and customers have a purchasing option based on the size of their vehicles.

The RT65 can be used on a small bus, the RT96 fits a mid-size bus and customers can put two RT65s on a large bus in place of a single unit. Plus, these rooftops can pair with the TM43 transit compressor for high performance systems.

As companies trend toward alternative fuels, Lehnert explains that customers will most likely lean more toward purchasing rooftop systems. This is, in part, because fuel tanks sometimes are in a place where skirt condensers are usually installed, so the only natural response is putting the A/C unit on top of the bus. Lehnert says Trans/Air is staying ahead of the industry trend toward the new refrigerant R1234yf, which has a low global warming potential and will keep customers informed.   


Write a letter to the editor
deli.cio.us digg it stumble upon newsvine
[ Request More Info about this product / service / company ]

    There are no comments.

E-NEWSLETTER

Receive the latest Metro E-Newsletters in your inbox!

Join the Metro E-Newsletters and receive the latest news in your e-mail inbox once a week. SIGN UP NOW!

View the latest eNews
Express Tuesday | Express Thursday | University Transit

White Papers

Factors in Transit Bus Ramp Slope and Wheelchair-Seated Passenger Safety Nearly 3 million U.S. adults are wheelchair or scooter users1, and as the population ages this number is expected to rise. Many wheelchair users rely upon public transportation to access work, medical care, school and social activities.

Mass Transit Capital Planning An overview of the world-class best practices for assessing, prioritizing, and funding capital projects to optimize resources and align with the organization’s most critical immediate and long-term goals.

The Benefits of Door-to-Door Service in ADA Complementary Paratransit Many U.S. transit agencies continue to struggle with the quality of ADA service, the costs, and the difficulties encountered in contracting the service, which is the method of choice for a significant majority of agencies. One of the most basic policy decisions an agency must make involves whether to provide door-to-door, or only curb-to-curb service.

More white papers


 
DIGITAL EDITION

The full contents of Metro Magazine on your computer! The digital edition is an exact replica of the print magazine with enhanced search, multimedia and hyperlink features. View the current issue