METRO Magazine Logo
MenuMENU
SearchSEARCH

Wash. Amtrak engineer missed signs before deadly derailment

Investigators interviewed the engineer and the qualifying conductor, who were in the lead locomotive during the accident trip.

January 30, 2018
Wash. Amtrak engineer missed signs before deadly derailment

 

3 min to read


As part of its ongoing investigation into the Dec. 18, 2017, derailment of an Amtrak passenger train in DuPont, Wash., the National Transportation Safety Board (NTSB) released an update about the agency’s investigation.

NTSB investigators interviewed the engineer and the qualifying conductor, who were in the lead locomotive during the accident trip. Both suffered serious injuries as a result of the derailment and were not able to be interviewed until the week of Jan. 15, 2018.

Ad Loading...

The following information is among that provided by the engineer and qualifying conductor during interviews with NTSB investigators:

  • The engineer, a 55-year-old male, was hired by Amtrak in 2004 as a conductor and then promoted to locomotive engineer in 2013.

  • In the five weeks preceding the derailment, the engineer had qualified on the Point Defiance Bypass section of track following the completion of seven to 10 observational trips in the locomotive as well as three trips operating the equipment, two northbound and one southbound.

  • The engineer said he felt rested at the start of his shift.

  • The engineer recalled that as the train passed milepost 15.5 it was traveling about 79 mph.

  • The engineer told investigators that he was aware that the curve with the 30 mph speed restriction was at milepost 19.8, and that he had planned to initiate braking about one mile prior to the curve.

  • The engineer said that he saw mileposts 16 and 17 but didn’t recall seeing milepost 18 or the 30 mph advance speed sign, which was posted two miles ahead of the speed-restricted curve.

  • The engineer said that he did see the wayside signal at milepost 19.8 (at the accident curve) but mistook it for another signal, which was north of the curve.

  • He said that as soon as he saw the 30 mph sign at the start of the curve, he applied brakes. Seconds later, the train derailed as it entered the curve.

  • The engineer said that he didn’t feel that having a qualifying conductor in the locomotive with him was a distraction.

  • The engineer also said that he would not have gotten behind the throttle if he had any reservations about his readiness to operate the train.

  • The qualifying conductor, a 48-year-old male, was hired by Amtrak in 2010 as an assistant conductor and was promoted to conductor in 2011.

  • At start of shift, he said he took part in the job briefing conducted by the conductor and the engineer. They went over general track bulletins and other items.

  • The qualifying conductor told investigators that he felt rested and alert at the start of his shift. He had never worked with the engineer before. He told investigators that the engineer appeared alert during the job briefing and while operating the train.

  • The qualifying conductor told investigators that there was minimal conversation between himself and the engineer during the trip. Instead he said he spent time looking at his paperwork to help learn the territory.

  • Just prior to the derailment, the qualifying conductor said he looked down at his copies of the general track bulletins. He then heard the engineer say or mumble something. He then looked up and sensed that the train was becoming “airborne.”

The accounts by the crewmembers in the lead locomotive of the accident train are just two sources of information that will be considered as the investigation progresses. In the coming weeks, investigators will compare these accounts with video captured from the inward- and outward-facing locomotive cameras, information from the locomotive event data recorder and other sources.

In addition to human performance and operations, investigators are continuing to develop information in a wide range of areas, including signals and train control, track and engineering, mechanical, crashworthiness, survival factors, and recorders.

The investigation is expected to last 12 to 24 months.

Ad Loading...

Additional information, including links to media briefings, the preliminary accident report, and other material is available on the Amtrak Cascades 501 accident page.

More Security and Safety

Rendering of CTA railcar
Security and Safetyby StaffMarch 19, 2026

FTA Launches Safety Inspections, Plans Directive to IDOT on CTA Issues

The FTA said its actions build on its nationwide campaign to make transit systems safer for American families.

Read More →
Close up of a public transit bus tire with text reading "House Committee Advances “Dalilah’s Law” to Strengthen CDL Safety Standards."
Security and Safetyby StaffMarch 19, 2026

House Committee Advances 'Dalilah’s Law' to Strengthen CDL Safety Standards

The bill would tighten CDL requirements, enhance training standards, and increase oversight of commercial driver licensing nationwide.

Read More →
A CTA railcar in a Chicago station
Security and Safetyby StaffMarch 11, 2026

CTA Sends Expanded Security Plan to FTA, Boosts Policing Hours by 75%

The Plan is CTA's formal response to an FTA Special Directive issued in December and details how the agency will significantly expand the law enforcement surge it launched.

Read More →
Ad Loading...
Anthony Incorvati cover photo for METROspectives
Sponsoredby Alex RomanMarch 5, 2026

The Future of Transit Safety with AXIS Communications’ Anthony Incorvati

Learn how technology is moving beyond passive recording to become an active operational tool.

Read More →
A photo of rail tracks in Ottawa, Canada

Building a National Framework for Transit Safety and Consistency

On a recent episode of METROspectives, METRO Magazine’s Executive Editor Alex Roman sat down with Ana-Maria Tomlinson, Director of Strategic & Cross-Sector Programs at the CSA Group, to explore a bold initiative aimed at addressing those challenges: the development of a National Code for Transit and Passenger Rail Systems in Canada.

Read More →
Chicago Metra train on tracks
Security and Safetyby StaffFebruary 27, 2026

Chicago's Metra Rail Announces 41 Safety Blitzes in 2026

During a safety blitz, Metra employees will visit one of the railroad’s 243 stations during the morning rush hour, distributing educational materials on train and grade-crossing safety, answering questions, and listening to riders’ safety concerns.

Read More →
Ad Loading...
A CDTA bus in service.
Security and Safetyby StaffFebruary 26, 2026

New York's CDTA Launches Ambassador Program

Operated in partnership with Tech Valley Security, trained CDTA Ambassadors will be on select routes and will rotate throughout CDTA’s route network. Their presence is intended to provide customers with an approachable, visible resource focused on assistance and engagement.

Read More →
Safety officers at a CATS light rail station
Security and Safetyby StaffFebruary 25, 2026

North Carolina's CATS Makes It Easier for Riders to Report Concerns

Customers have always been able to report concerns through the CATS Customer Service line or the “Report a Problem to CATS” feature in the CATS-Pass mobile app; however, CATS has also integrated a Text-a-Tip line, giving riders multiple, easy-to-use channels to get support.

Read More →
2026 Disaster Response Guide Call for Experts is Open.
Safetyby StaffFebruary 9, 2026

Disaster Readiness Starts Before the Storm [Call for Experts]

The 2026 Disaster Response Guide is officially underway, and we’re now opening a Call for Insights and Experts.

Read More →
Ad Loading...
A Société de transport de Montréal articulating public transit bus.
Security and Safetyby StaffFebruary 4, 2026

Montreal’s STM Expands Text Message Safety Reporting to Bus Network

The agency opens its text message safety reporting system to buses, enabling discreet, non-urgent reports across Montreal’s entire transit network.

Read More →