METRO Magazine Logo
MenuMENU
SearchSEARCH

Develop an Effective PM Program to Cut Costs

Start with a schedule recommended by the manufacturer, track any component failures, use fluid analysis and train drivers to identify and report problems.

by Michael D. Winter
January 1, 2005
4 min to read


Operators of small buses who implement a thorough, well-considered preventive maintenance (PM) program can reap substantial savings. Worn or damaged components can be replaced before they cause costly breakdowns, which also helps to reduce the amount of time the vehicles are off the road and in the shop. Such a program goes well beyond simply performing routine maintenance procedures on a regular basis. A good PM program includes detailed record keeping and ongoing analysis of the fleet’s operations and performance. Getting started
To develop an effective PM program, start with a baseline for vehicle maintenance. Use the maintenance schedule suggested by the manufacturer of the bus and its various component suppliers (lift, chassis, powertrain, etc.). Operators of only one or two buses often rely on their bus dealer to establish their PM program. These dealers, in turn, rely on OEMs to provide ongoing maintenance assistance, service advisories and updates. Most manufacturers offer multiple schedules to accommodate the different ways bus operators use the vehicles. The schedules differentiate between buses driven on short, multiple-stop routes and those employed for long-trip routes. Gasoline and diesel vehicles also require different schedules. Select the schedule that applies to your situation. Then closely examine how your drivers use their vehicles and adjust the schedule accordingly. A short-trip diesel schedule may suggest changing the oil and filter every 2,500 miles or three months, but if your routes involve more stop-and-go driving through dusty areas, the oil may need changing sooner and you may need to implement an hourly schedule or fuel usage schedule. A less punishing route may extend your service interval. Contact your manufacturer for recommendations. By refining the baseline schedule, your maintenance department can perform all routine procedures at the optimal interval to produce the best cost savings and the best vehicle performance. Component strategies
Inevitably, breakdowns do occur. That’s when it’s time to analyze what component required replacement and why. The reason: if a component requires replacement on one vehicle, it may also on others. Look for damage caused by a defective part, overload or driver abuse. For instance, if your mechanic determines that a diesel engine has a clogged fuel filter, you may have received a batch of contaminated fuel. That problem will spread across your fleet unless you take immediate corrective action. Another element of an effective PM program is identifying which components and labor operations cost the most. By ranking components and labor according to their percentage of maintenance costs, you can determine how to divide your resources. In most cases, tires, followed by engines and brakes, account for the highest maintenance costs. Some estimates say tires account for about 20% of a vehicle’s maintenance costs. You need to invest in routine maintenance to ensure long-term performance. Therefore, check air pressure and rotate tires on a regular basis. Your record-keeping system will tell you the optimum time for tire rotation based on how your vehicles are used. Fluid analysis
Fluid analysis offers one of the best methods for diagnosing potential vehicle problems. Benefits of fluid analysis include the following:

  • Reducing maintenance costs through optimizing fluid life.

  • Improving life expectancy of vehicle components.

  • Creating an early warning system for mechanical problems. A laboratory can perform two different types of tests on oil. One measures contaminants and oil breakdown components in the fluid. A spectrochemical or spectrographic analysis measures certain metallic elements present as microscopic particles. By using the more sophisticated analysis, fleet managers can track wear patterns in an engine and even predict failures. Driver’s report
    You can find another element of a good PM program in the driver’s report. Federal law requires the driver to check 10 specific items before the vehicle leaves the terminal. At a minimum, the driver must inspect:

  • Steering system

  • Parking brake

  • Service brakes

  • Tires

  • Wheels

  • Lights and reflectors

  • Horn

  • Windshield wipers

  • Mirrors

  • Emergency equipment Your garage must repair any defect or deficiency in these 10 items before the vehicle returns to the road. Your maintenance team can take advantage of this daily inspection to further the PM program. Besides inspecting components, your drivers can tell your mechanics about quirks in handling or signs of wear. All can be clues to possible component failure.

Topics:Management
Subscribe to Our Newsletter

More Management

An MCI J4500 for Rustad Tours
Motorcoachby StaffJune 26, 2026

Minnesota's Rustad Tours Takes Delivery of New MCI Motorcoach

The latest addition represents Rustad Tours’ 17th new MCI coach, marking more than four decades of partnership between the two companies.

Read More →
Managementby StaffJune 26, 2026

Seattle's Sound Transit Refunds Debt, Saving Approximately $23 Million

As part of the debt refunding process, Sound Transit requested that the credit rating agencies rate the new debt issuance along with the current outstanding debt.

Read More →
An preserved white and green older CATS transit bus.
Managementby News/Media ReleaseJune 25, 2026

North Carolina’s CATS Celebrates 50 Years of Public Transit

The milestone event honored generations of transit workers and showcased how public transportation has evolved into a multimodal system serving one of the nation's fastest-growing regions.

Read More →
Ad Loading...
Endera electric buses for California’s Mendocino Transit Authority
Technologyby StaffJune 25, 2026

Biz Briefs: Endera Delivers to California, Safety Vision Teams with San Antonio's VIA, and More

From manufacturers and suppliers to transit agencies and motorcoach operators, these updates offer a snapshot of the projects, partnerships and business moves driving the industry forward.

Read More →
Investing in Long-Term Transportation Reliability
ManagementJune 24, 2026

Smarter Maintenance Starts with Risk, Not Routine

As infrastructure ages and funding pressures mount, effective asset management is becoming critical to maintaining safe, reliable transportation networks.

Read More →
Seniors exiting an OCTA van.
Managementby News/Media ReleaseJune 24, 2026

OCTA Extends Senior Mobility Program Agreements Through 2031

The Measure M-funded program has provided nearly 3.5 million trips and will continue helping thousands of older adults maintain independence and access essential services.

Read More →
Ad Loading...
A VIA Metropolitan PRIMO bus
Busby StaffJune 23, 2026

VIA's Silver Line Clears Environmental Review, Advances Toward Construction

The VIA Rapid Green Line is currently under construction, with service expected to begin in April 2028.

Read More →
New MobilityJune 19, 2026

Modernizing Mobility with CharterUP CEO Armir Harris

From digital transformation to evolving customer demands, CharterUP's Armir Harris offers his perspective on the transportation industry's next chapter.

Read More →
CTTC Bolsters Statewide Workforce Development
Managementby StaffJune 19, 2026

CTTC Enhances Transit Workforce Pipeline Through New Partnerships and Leadership

The group's latest initiatives focus on developing talent, expanding training opportunities and addressing workforce needs across the transit sector.

Read More →
Ad Loading...
A San Diego Metropolitan Transit System trolley wrapped with a Padres player advertisement.
Managementby Staff and News ReportsJune 19, 2026

San Diego MTS Keeps Service Intact With New FY 2027 Budget

The approved spending plan avoids route cuts and lays the groundwork for addressing transit funding challenges through the end of the decade.

Read More →