The National Transportation Safety Board (NTSB) is advising motorcoach operators to inspect all buses equipped with automatic slack adjusters manufactured by Haldex Brake Products for fractured or disconnected control arms. The NTSB issued its safety recommendation in a report on a 1998 motorcoach crash in which eight passengers were killed and 15 others, including the driver, were seriously injured. The 1992 Van Hool coach, operated by Bruins Transportation of Brooklyn, N.Y., was transporting 22 passengers from New York City to casinos in Atlantic City, N.J., when the driver lost control of the vehicle during a lane change on the Garden State Parkway near Old Bridge, N.J. The bus careened off the roadway and overturned into a ravine. Although brake performance was not determined to be a factor in the crash, NTSB investigators discovered that the right-side brake was grossly out of adjustment. Further examination revealed that the automatic slack adjuster on the brake had a fractured control arm. Based on wear patterns, the control arm was broken for some time. A brake inspection less than a month before the accident did not catch the problem. Follow-up testing by NTSB investigators at Haldex’s corporate facility in Grain Valley, Mo., showed that slack adjusters with broken control arms can lead to a rapid loss of adjustment at the affected wheel. In its report, the safety board recommended that the American Bus Association and the United Motorcoach Association notify their members of this potential problem and urged them to inspect all vehicles with automatic slack adjusters for fractured or disconnected control arms. This self-inspection is particularly important because the location of the slack adjusters, especially on motorcoaches, makes it difficult for commercial vehicle inspectors to examine the control arm. The NTSB also recommended that the National Highway Traffic Safety Administration monitor the progress of Haldex in correcting the problem of rapid deadjustment of brakes caused by a fractured or disconnected control arm.
NTSB warns of potential brake problem
The National Transportation Safety Board (NTSB) is advising motorcoach operators to inspect all buses equipped with automatic slack adjusters manufactured by Haldex Brake Products for fractured or disconnected control arms.
More Management
Inside The Bus Coalition’s Push for Stronger Federal Transit Investment
In this conversation, TBC’s Executive Director Ed Redfern, President Corey Aldridge, and Washington Representative Joel Rubin outline the coalition’s key policy priorities, the challenges facing transit agencies, and how industry stakeholders can work together to strengthen the voice of bus transit at the federal level.
Read More →
Des Moines DART CEO Joins Minneapolis Metro Transit
Amanda Wanke, who has worked at DART for 10 years, including the past 2½ years as CEO, will join Metro Transit as deputy chief operating officer, operations administration.
Read More →
SEPTA to Launch New Bus Network Redesign in August
The first comprehensive overhaul of SEPTA’s bus network will expand frequent service, add routes, and phase in changes through 2027.
Read More →
CDTA Outlines Mobility Vision at 2026 State of the Authority Event
In his first State of CDTA address as CEO, Frank Annicaro highlighted the organization’s continued focus on delivering reliable service, investing in innovation, and strengthening connections across the region.
Read More →
WMATA Introduces Priority Seating Reminder Pilot for Metro Riders
The agency is testing floor decals on select railcars to improve awareness of priority seating and support a more accessible transit experience.
Read More →
Transit Unplugged Celebrates 400 Episodes
The special episode features an exclusive interview with Mark Miller, president of Constellation Software Inc. and executive chairman of the Volaris Group, who reflects on the podcast's early vision and the importance of creating a platform where transit leaders can share ideas and learn from one another.
Read More →
NFI Group Officially Opens New Flyer All-Canadian Build Facility in Winnipeg
The CAD facility enables NFI to complete full domestic production of heavy-duty transit vehicles, including zero-emission buses, in Winnipeg for the first time in 15 years.
Read More →
APTA: Surface Transportation Funding Delivers 5:1 Economic Return, Supports 41,400 Jobs per $1B
The findings provide clear evidence that sustained Federal investment in public transit and passenger rail delivers significant returns for workers, communities, taxpayers, and the U.S. economy, APTA officials said.
Read More →
Building a National Framework for Transit Safety and Consistency
On a recent episode of METROspectives, METRO Magazine’s Executive Editor Alex Roman sat down with Ana-Maria Tomlinson, Director of Strategic & Cross-Sector Programs at the CSA Group, to explore a bold initiative aimed at addressing those challenges: the development of a National Code for Transit and Passenger Rail Systems in Canada.
Read More →
FTA Invests $100M to Strengthen Transit for 2026 World Cup
The funding will ensure communities can expand transit options to meet increased demand for services around stadiums.
Read More →
